Scientific Equipment Source | 4-555 Wentworth Street East Oshawa, ON, L1H 3V8 | Tel: 905-231-0930


Rotary Evaporator, SES 1002,…


SciCann - The Science of Cannabis

SciCANN which has been working in the Cannabis industry for 15 years. The SciCANN division of Scientific Equipment Source Inc is your source for new and refurbished Cannabis quality control laboratory testing equipment. We supply HPLC, GC, NIR, and more for Potency, terpenes, R&D, Residual solvents, moisture content, pesticide screening, microbiological purity, aflatoxins and more as well as consult on the LP process.

Rotary Evaporator, SES 1002, 10L Rotovap, NEW


Rotary Evaporator, SES 1002, 10L Rotovap, NEW

Rotating flask 10L Flange mouth:Φ280mm/Φ95mm
Collecting flask 5L Flange mouth:Φ230mm/Φ50mm

Rotating motor power 60W
Heating power 4.5kw


Rotary Evaporator, SES 1002, 10L Rotovap, NEW

Rotary evaporator use stepless speed to provide constant rotational speed for the evaporating flask so the material in the flask forms a large and uniformed film. Using very accurate digital temperature control the constant temperature water bath heats the rotating flask uniformly providing high-speed evaporation under vacuum. Then the highly-efficient glass condenser condenses the solvent vapor and it is collected in the receiving (collection) flask.

• The main bracket is made of stainless steel and aluminum alloy.
• All glass components are borosilicate glass (GG-17), high temperature, anti-corrosion.
• Sealing system uses fluorine rubber and Teflon two-way combination seal for long life
corrosion-resistant sealing. Maintaining a tight vacuum within the system.
• Vacuum gauges show real-time vacuum, oil-based table with anti-vibration system.
• Upright three-layer serpentine coil condenser, main cooler + double cooler, ensuring high recovery.
• Continuous feeding valve with PTFE tube for higher production.
• Collecting Flask are equipped with drain valve to facilitate the collection and discharge of materials.
of evaporated extracts.
• Check valve control, continuous discharge while the system is running with a vacuum switch.
• All valves use the latest integrated sealing systems to provide good sealing with simple and simple and convenient operation.
•Microprocessor-based power switch control.
• LCD full screen display, temperature, speed dual digital display, bath thermostat
control, PT100-type sensor, quickly and accurately change to a new temperature.
• Brushless DC motor for stable rotation, no sparks and controlled slow down.
• Manual Bath lift.
• The bath is made of high-quality corrosion-resistant 304 stainless steel with a protective silicone outer coating to protect the user from the hot surface.
• Over-temperature protection. When the actual temperature exceeds the set temperature by 5 ºC, the machine will automatically power-off heating.
• Low water cut-off protection for the bath will automatically power off the system if the water falls to low in the bath. This protects the heating elements.
• Power failure protection. In the case of a sudden power failure while the system is running. The system will reset and remain in the off state when the power returns.

Technical data
Model SES RE-1000
Rotating motor power 60W
Lifting motor power 40W
Heating power 4.5kw
Rotating flask 10L Flange mouth:Φ280mm/Φ95mm
Collecting flask 5L Flange mouth:Φ230mm/Φ50mm
Vacuum degree 0.098Mpa
Rotary speed 0-120rpm/min
Heating temp. 0-400C
Temp controlling accuracy ±1C
Glass temp range -80C to 250C
Condenser size MainΦ130*640H(mm)
Feed valve Φ35 flange mouth
Release valve Φ35 flange mouth*2pcs
Didcharge valve 10mm glass and lean discharge port
Bath size/volume Φ350*220H(mm) about21L
Voltage 220V 50Hz (various power supply and plug can be
Gross weight 95kg
Packing size 1070*520*1210mm(L*W*H) about 0.67m3