Multiparameter EC/TDS/Salinity Meter, Hanna edge HI2030-01 , New
edge’s groundbreaking design is the culmination of Hanna’s vision, design capabilities, integrated production and world class R&D. The edge meter is only 0.5” thick yet rich in features to accommodate the needs of a vast amount of customers. For those that prefer very simplistic operation there is a basic mode operation with simplified menu and options while for those who require advanced features there is the full featured standard operating mode. The edge HI2030 EC/TDS/Salinity kit can can be upgraded at any time with additional probes to measure pH or Dissolved Oxygen.
• edge features a 5.5” LCD display that you can clearly view from over 5 meters. The large display and it’s wide 150° viewing angle provide one of the easiest to read LCD’s in the industry.
• edge features a capacitive touch keypad that gives a distinctive, modern look. Since the keypad is part of the screen, your buttons can never get clogged with sample residue.
• edge features clear, full text guides displayed on the bottom of the screen. There is no need to decipher scrambled abbreviations or symbols; these helpful messages guide you through every process quickly and easily.
edge® is packed with many cutting edge features to ensure accuracy and usability.
edge electrodes are highly advanced, featuring a built-in microchip that stores calibration information that is automatically retrieved by edge once the electrode is plugged in. These digital electrodes also feature an easy to plug in 3.5 mm connector so you never have to worry about the right angle or aligning pins
The HI2030 edge EC/TDS/Salinity meter is supplied with the HI763100 four ring platinum conductivity probe that has a built in temperature sensor for automatic temperature compensated measurements. The four ring technology allows for a wide range of measurement with a single probe as compared to amperometric two pole probes that have a limited range and can suffer from polarization effects. The HI763100 probe has a glass and PVDF body with a PEI (polyetherimide ) sleeve. Both materials have excellent resistance against many aggressive chemicals.
3.5 mm Probe Input
Plugging an electrode in has never been simpler, no alignments, no broken pins, just connect the 3.5 mm plug and get started.
Cradle and Electrode Holder
edge is equipped with a benchtop cradle with an adjustable swivel electrode holder to charge and hold the edge securely in place at the optimium viewing angle.
-2.000 to 16.000 pH, -2.00 to 16.00 pH, ±1000 mV
0.001 pH, 0.01 pH, 0.1 mV
pH Accuracy (@25ºC/77ºF)
±0.2 mV, ±0.01 pH, ±0.002 pH
up to 5 points
pH Calibration Buffers
1.68, 10.01, 12.45, 4.01, 6.86, 7.01, 9.18, two custom buffers
pH Temperature Compensation
ATC: -5.0 to 100.0ºC; 23.0 to 212.0°F*
0.00 to 29.99 μS/cm, 30.0 to 299.9 μS/cm, 300 to 2999 μS/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, up to 500.0 mS/cm (absolute EC)**
0.01 μS/cm, 0.1 μS/cm, 1 μS/cm, 0.01 mS/cm, 0.1 mS/cm
EC Accuracy (@25ºC/77ºF)
±1% of reading (±0.05 μS/cm or 1 digit, whichever is greater)
1 point offset calibration (0.00 μS/cm in air), 1 point slope calibration in EC standard 84 μS/cm, 1413 μS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm and 111.8 mS/cm
0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150 to 1499 ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L (absolute TDS)**, with 0.80 conversion factor
0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L
TDS Accuracy (@25ºC/77ºF)
±1% of reading (±0.03 ppm or 1 digit, whichever is greater)
through EC calibration
TDS Conversion Factor
0.40 to 0.80
0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L*
0.1% NaCl, 0.01 PSU, 0.01 g/L
Salinity Accuracy (@25ºC/77ºF)
±1% of reading
1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration)
0.00 to 45.00 ppm (mg/L), 0.0 up to 300.0% saturation
0.01 ppm, 0.1% saturation
±1 digit, ±1.5% of reading
one or two points at 0% (HI 7040 solution) and 100% (in air)
DO Temperature Compensation
ATC: 0 to 50 ºC; 32.0 to 122.0 °F
0 to 40 g/L (with 1 g/L resolution)
DO Altitude Compensation
-500 to 4000 m (with 100 m resolution)
-20.0 to 120.0 ºC, -4.0 to 248.0 °F
0.1 °C, 0.1 °F
±0.5 °C, ±1.0 °F
EC/TDS/Salinity Temperature Compensation
Automatic -5 to 100º C (23 to 212º F) NoTC – can be selected to measure absolute conductivity.
Conductivity Temperature Coefficient
0.00 to 6.00% / ºC
pH Electrode Diagnostics
Glass and reference junction diagnostics ( HI 11311 & HI 12301 only), out of calibration range , probe condition, response time
up to 1000*** records organized in: Manual log-on-demand (Max. 200 logs), Manual log-on-stability (Max. 200 logs), Interval logging *** (Max. 600 samples; 100 lots)
1 micro USB port for charging and PC connectivity, 1 USB port for storage
0 to 50°C (32 to 122°F), RH max 95% non-condensing
Built-in rechargeable battery with up to 8 hours of continuous use
5 VDC adapter (included)
202 x 140 x 12.7mm (8” x 5.5” x 0.5”)
250 g (8.82 oz)
HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual.
2 years (probe 6 months)
* temperature limits will be reduced to actual probe/sensor limits
** with temperature compensation function disabled
*** For standard mode only (logging)