Scientific Equipment Source | 4-555 Wentworth Street East Oshawa, ON, L1H 3V8 | Tel: 905-231-0930


Autoclave, (Sterilizer) Market Forge…


SciCann - The Science of Cannabis

SciCANN which has been working in the Cannabis industry for 15 years. The SciCANN division of Scientific Equipment Source Inc is your source for new and refurbished Cannabis quality control laboratory testing equipment. We supply HPLC, GC, NIR, and more for Potency, terpenes, R&D, Residual solvents, moisture content, pesticide screening, microbiological purity, aflatoxins and more as well as consult on the LP process.

Autoclave, (Sterilizer) Market Forge STM-EL, Condition New


Autoclave, (Sterilzer) Market Forge STM-E, Condition New

Sterilize glass beakers, pipettes, test tubes and flasks. Metal and plastic instruments, syringes, needles, brushes, rubber gloves, catheters, rubber tubing, dressings, linens, petri dishes and more.


Autoclave, (Sterilizer) Market Forge STM-EL, Condition New

Standard Features

Adjustable temperature controls 230°-250°F (110°- 121°C) range
Temperature up to 250°F (121°C)
Thermostatic steam trap
Thermometer range 180°-300°F (82°-149°C)
0-30 lb. steam gauge
0-60 minute timer
Low water cut-off, signal light, and safety valve
Flat perforated steam baffle
Removable pan supports
For use at altitudes up to 6500 ft

All Models – 150 lbs (68 kg)

OPTIONS & ACCESSORIES (at additional charge)

Sterilmatic trays (stainless steel, one piece, round cornered) Perforated trays available in the following sizes:
‰ 12” x 20” x 2-1/2” (holds 3 of this size)
‰ 12” x 20” x 4” (holds 2 of this size + one 2-1/2” tray) $350cdn ($265US) Part number 10-1205
‰ 12” x 20” x 6” (holds one of this size + one 2-1/2” tray) $600cdn ($455US) Part number 10-1205

Sterilmatic wire basket (recommended for dressings) Available in the following sizes: ‰ 12” x 20” x 2-1/2” ‰ 12” x 20” x 4”

Sterilmatic tubular leg stainless steel stand with shelf $1452cdn ($1100US ) part number 95-6060

Second shelf for tubular leg stainless steel stand

Exhaust condenser (for condensing exhaust steam when unit cannot be vented to outside) $2150cdn ($1630US) Part number 95-0436

Temperature Recorder with 6″ chart, 120V $3220cdn ($2440USD) Part Number 95-6233

Autoclave (sterilizer) MODELS Available
‰ STM-E – Domestic Fixed Temperature
‰ STM-EL – Domestic Adjustable Temperature
‰ STM-EX – Export Fixed Temperature
‰ STM-ELX – Export Laboratory Adjustable Temperature

The Sterilmatic is dependable, and ideally suited for laboratories, veterinary clinics, processing plants and more.

Sterilizing cylinder will be A.S.M.E. constructed and National Board Registered 3/16” (4.8mm) thick welded aluminum.. Sterilizer exterior is made of polished stainless steel. Interior dimensions of 16” (406mm) in diameter and 26” (660mm) long with a cubic con- tent of 5,220 cubic inches (85 liters) and will have a door opening of 13-1/2” (343mm) wide and 11” (279mm) high.

Sterilizing compartment will have a pan capacity of: ‰ (3) 12” x 20” x 2-1/2” (305mm x 508mm x 64mm) or ‰ (2) 12” x 20” x 4” (305mm x 508mm x 102mm) or
‰ (1) 12” x 20” x 6” (305mm x 508mm x 152mm)

The sterilizer door will be self-sealing type which cannot be opened until steam pres- sure is completely exhausted. Door will be 12 gauge stainless steel, removable for cleaning without tools. Door gasket will be one-piece molded, replaceable without tools or cement.

Sterilizing cycle will be fully automatic, time-controlled and have a built-in temperature control which provides 250°F (121°C). Model STM-EL has the additional feature of an adjustable temperature control that can be set anywhere from 230°-250°F (110°- 121°C) range. All operating controls will be located at the top, front of the Sterilizer. Pressure will be automatically and quickly exhausted and power supply shut off at termination of cycle. Slow exhaust may be selected for sterilizing liquids.