Full CBD extraction line
Including
Ethanol Cooling Unit
-Jacketed Cooling tank with stirrer
Model: ST-A800 Volume:800L I.D.:1000mm
Design pressure(MPA): 0.1-ATM
Jacketed pressure(MPA): ATM-0.3
Design tempreture: -80-200℃
Material: SS304
-Chiller
Model:DLSB-200/80
Volume:200L
Lowest temp: -80℃
Refrigerating capacity(W): 1176W-17640W
-Centrifugal pump
Model: LQF-3
Flow: 3T/H
Max Lifting:70m
Max.Suction:4.5m
Outlet pressure:0.7Mpa
Extraction Unit
-Centrifuge
Model:PP-45
- Drum:
Diameter: 450mm
Height: 300mm
Working volume(Filter bag): 45L
Rotate speed: 1500 RPM
- Power: 2.2KW
- Liquid tank volume:85L
- Jacket volume: 20L
- Voltage: 220V/60HZ
- With Jacketed and temperature measurement function,vacuum function
-Chiller
Model:DLSB-50/80
Volume:50L
Lowest temp: -80℃
Filter Unit
-Vacuum filter
Model:ZF-100L
Model: ZF-100L
Glass material: GG-17
Frame material: Stainless steel
Flask volume: 100L
Funnel size(mm):550*320
Funnel material: Stainless steel
Reaction opening: 3
Overall size(mm):580*5800*2000
Weight: 90kg
-Vacuum pump (Matched to filter)
Model: 2XZ-4
Suction rate: 4L/s
Speed: 1400rpm
Motor power: 0.55KW
Noise: 67dBA
Oil content: 1L
Solvent Recovery Unit
-Falling film evaporator + Steam boiler(200L/H)
1.Structure: A. tubular heater+vacuum evaporation
- tubular condensor cooling system
- equipped with two 72kw electric heating steam generators;
- Equipment composition: A.heater 12m2
- condenser 16m2
- separator
- feed pump
- discharge pump
- vacuum pump
- balance cylinder
- electric control box
- bracket
- internal connecting pipe fittings
- material thickness: A. heater: δ = 3mm / SS304, tube: SS304
- separator δ = 4mm / SS304
C.condenser δ = 3mm / SS304 tube:SS304;
- work pressure: Heating steam: 0.3MPa; equipment ultimate vacuum: – 0.095 MPa;
5.delivery system: Feed pump 1.1kw; discharge pump 0.75kw; condensate pump 0.75kw; vacuum pump 2.2kw
-Industrial Chiller(LPM70F)
1.Compressor : Cooling power: 151.1KW Voltage:220V/60HZ,3phase
- The refrigerant:R134A
- Evaporator: Chilled water outlet temperature:7℃ Chilled water inlet temperature:12℃ Cool water flow: 6.2m³/H Size: DN50MM
- Condenser: Inlet air temp: 35℃
Decarboxylation Unit
-Decarboxylation reactor
Model: DS-20
Glass material: GG-17
Frame material: SS304
Reactor volume: 20L
Jacketed volume:8L
Receiving volume: 5L
Temperature: -80-250℃
Vacuum degree:-0.098Mpa
Stirring speed: 0-450rpm
Stirring shaft diameter: 15mm
Sirring power: 90W1/3
-Circulating oil bath
Model: GY-20L
Main material: stainless steel
Volume: 28L
Oil pump power: 120W
Flow rate: 5-10L/min
Pump lift: 8-12m
Heating power: 3KW
Temp. range: 0-300℃
Temp. accuracy: ±1℃
Intelligent temp. control
With K type sensor and digital display
-Chiller
Model: DLSB-10/10
Volume: 10L
Lowest temp: -10℃
Refrigerating capacity(W): 1248- 319
Flow: 20L/min
Circulating pump power: 100W
-Vacuum pump
Model: SHZ-95B
Flow(L/min):80
Lift(m):12
Voltage:220v/60HZ
Power:370W
Single head pumping
capacity(L/min):10
Capacity(L):50
Vacuum: -0.098Mpa
Pumping head NO.: 5
Overall size:450*340*870
Material: Stainless steel
Distillation Unit
-Molecular distialltion (LMD-150)
Model:LMD-150
Evaporation Area: 0.25m2
Processing Rate:1.0-8 KG/H
Including the main molecuar
distiller, supporting heater and
chiller and vacuum pump system
5 options(The same with the picture)
Crystallization Unit
-Crystallization reactor
Model:CR-20
Reaction flask:20L
Receiving flask:10L
Vacuum degree:-0.098Mpa
Temperature: -80-250℃
Filtering accuracy: 10um
-High and low temperature circulating system
Model:GDSZ-20/-40+200℃
Volume:20L
Lowest temp: -40℃
High temp: 200℃
Heating power(W):3000
Refrigerating capacity(W): 3720-
980 Pumping
Capacity(W):100W
Flow:20L/min
-chiller
Model: DLSB-10/10
Volume: 10L
Lowest temp: -10℃
Refrigerating capacity(W): 1248- 319
Flow: 20L/min
Circulating pump power: 100W
-vacuum pump
Model: SHZ-95B
Flow(L/min):80
Lift(m):12
Voltage:220v/60HZ
Power:370W
Single head pumping
capacity(L/min):10
Capacity(L):50
Vacuum: -0.098Mpa
Pumping head NO.: 5
Overall size:450*340*870
Material: Stainless steel